DIN Bends

DIN 11852 Series 1 Short Bends

•  Available Sizes : DIN10,DN15,DN20,DN25,DN32,DN40,DN50,DN65,DN80,DN100,DN125,DN150,DN200
• I.D Polishing : Internal Surface Finish 0,8Ra or better
•  O.D Polishing : Internal Surface Finish 0,8Ra or better
•  Material : 1.4404( 316 L)-1.4307(304 L)
•  Certifications : MTR-DIN STANDARDS

DIN 11852 Series 2 Short Bends

•  Available Sizes : DIN10,DN15,DN20,DN25,DN32,DN40,DN50
• I.D Polishing : Internal Surface Finish 0,8Ra or better
•  O.D Polishing : Internal Surface Finish 0,8Ra or better
•  Material : 1.4404( 316 L)-1.4307(304 L)
•  Certifications : MTR-DIN STANDARDS

DIN 11852 Series 1 Long Bends

•  Available Sizes : DIN10,DN15,DN20,DN25,DN32,DN40,DN50,DN65,DN80,DN100
• I.D Polishing : Internal Surface Finish 0,8Ra or better
•  O.D Polishing : Internal Surface Finish 0,8Ra or better
•  Material : 1.4404( 316 L)-1.4307(304 L)
•  Certifications : MTR-DIN STANDARDS

DIN 11852 Series 2 Long

•  Available Sizes : DIN10,DN15,DN20,DN25,DN32,DN40,DN50
• I.D Polishing : Internal Surface Finish 0,8Ra or better
•  O.D Polishing : Internal Surface Finish 0,8Ra or better
•  Material : 1.4404( 316 L)-1.4307(304 L)
•  Certifications : MTR-DIN STANDARDS

DIN 11864-ISO 2851

•  Available Sizes : DIN10.3,DN14.0,DN18.1,DN23.7,DN29.7,DN38.4,DN44.3,DN56.3,DN72.1,DN84.3
• I.D Polishing : Internal Surface Finish 0,8Ra or better
•  O.D Polishing : Internal Surface Finish 0,8Ra or better
•  Material : 1.4404( 316 L)-1.4307(304 L)
•  Certifications : MTR-DIN STANDARDS
DIN 11864 ISO 2851 bend for aseptic and hygienic stainless steel piping systems DIN 11852 series 2 long bend for enhanced flow performance in hygienic piping applicationsLogo FDA DIN 11852 series 1 long bend for smooth flow direction in stainless steel piping systems DIN 11852 series 2 short bend for hygienic piping with improved dimensional standards
DIN 11852 series 1 short bend for compact hygienic stainless steel piping systems
iso flag

 

 

 

BPE Standards -Updates for 2009
Part SD Design Relating to Sterility and Cleanability of Equipment
•  This part will include substantial new content on equipment and process systems plus significant updates to existing sections of the standard. These changes include several new sections with requirements for the design of bioreactors/fermentors, sterilizers/autoclaves, CIP distribution systems, and process gas distribution systems. The entire CIP Systems and Design section has been revised to meet current industry practices. Requirements have been expanded for CIP skid design, CIP flow rates, process vessel cleaning, CIP supply and return headers, and CIP spray devices. It has also been updated with enhanced content on the design of hygienic pumps, ball valves, O-ring connections, top-entering mixers, and steaming for bioburden control.