•	Available Sizes	:	1/4", 3/8", 1/2", 3/4", 1", 1½", 2", 2½",3", 4",6"
•	Body Material	:	316L ASME BPE, Hastelloy,AL6XN
•	Diaphragm Material	:	EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•	Operation	:	Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
•	Surface Finish	:	SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE

Recent developments in tangential flow filtration systems, small-scale bioreactors, chromatography skids and lowflow sampling applications have brought about numerous requests for smaller valve sizes. As part of our ongoing commitment to provide the industry with application specific, state-of-the-art products, Aquasyn has introduced the Micro-Bio series valve. Roughly the size of an egg this valve is 40% smaller than our standard Biotech series valves. As with our Biotech series valves, the Micro-Bio utilizes a common sized body but offer the added advantage of miniature 1/8?, 3/16? and 1/4? nominal diameters. The Micro-Bio also shares the same inherent quality and features of our other valves, such as Tork-Tite? feet, integral sealing ridge on the body, a wide variety of materials of construction, surface finishes, end connections and other options.

• Compact lightweight design
• Choice of spring return or double acting operation
• Selected limit switch options available
• Banjo mount solenoid options available
• NAMUR adaptor available
• High cycle life
• Integral controlled travel stop

• EPDM
• Two options are provided for the material of diaphragms: EPDM soft artificial rubber and PTFE rigid artificial rubber. Single or double diaphragm designs are available. Material of Diaphragm Certificate of material Declaration of Conformity with FDA (CFR 21:177.2600 or 177.1550) USP Class VI Certification EPDM (Single diaphragm) 10 bar, 145 psi -10oC~100oC, 14oF~212oF SIP 150oC = 60min EPDM +PTFE (Double diaphragm) 8 bar, 101 psi -10oC~100oC, 14oF~212oF SIP 150oC There is no limit to the sterilization time

•	Available Sizes	:	1/4", 3/8", 1/2", 3/4", 1", 1½", 2", 2½",3", 4",6"
•	Body Material	:	316L ASME BPE, Hastelloy,AL6XN
•	Diaphragm Material	:	EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•	Operation	:	Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
•	Surface Finish	:	SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE

The Aquasyn tank bottom valve is a reliable solution for your tank outlet needs, with its conical profile allows for complete drainability and the prevention of deadlegs or entrapment areas. These tank valves are installed by either welding, clamping or bolting to the tank surface. Tank bottom valves are available in sizes ranging from 1/4? through 4?, are manufactured using a variety of materials including our standard type 316L stainless steel. They are also available with a wide variety of drain ports and end connections to suit the process needs. Opening and closing of the valve can be achieved by means of manual or pneumatic actuation

• Compact lightweight design
• Choice of spring return or double acting operation
• Selected limit switch options available
• Banjo mount solenoid options available
• NAMUR adaptor available
• High cycle life
• Integral controlled travel stop

• EPDM
• Fluoropolymer faced (TFM 1700)/EPDM
• Silicone
• Viton
• Ultraz Fluoroelastomer
• All diaphragms conform to USP Class VI specifications
• Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

•	Available Sizes	:	1/4", 3/8", 1/2", 3/4", 1", 1½", 2", 2½",3", 4",6"
•	Body Material	:	316L ASME BPE, Hastelloy,AL6XN
•	Diaphragm Material	:	EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•	Operation	:	Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
•	Surface Finish	:	SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE

State of the art block body design, coupled with the tighest bend radii in the industry allow Aquasyn point of use valves to be easily integrated into areas where space is at a premium. Our design provides minimal pressure drop and superior system performance. We can deliver customized and standard point of use valves on a fast track basis.

•Minimized footprint
•Compact centerline dimensions
• Readily cleanable exterior, all surfaces sloped and radiused
•True Zero Static design
•Low pressure drop, high flow co-efficient (Cv) insures optimum performance
•Integrated sampling valves and other custom options available
•92° angle bends to facilitate drainability

• EPDM
• Fluoropolymer faced (TFM 1700)/EPDM
• Silicone
• Viton
• Ultraz Fluoroelastomer
• All diaphragms conform to USP Class VI specifications
• Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

•	Available Sizes	:	1/4", 3/8", 1/2", 3/4", 1", 1½", 2", 2½",3", 4",6"
•	Body Material	:	316L ASME BPE, Hastelloy,AL6XN
•	Diaphragm Material	:	EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•	Operation	:	Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
•	Surface Finish	:	SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE

Aquasyn Zero Static block body tee valves are the premiere product of their kind in the industry. Our true Zero Static design offers the smallest footprint to facilitate installation within complicated piping geometries and is the lightest weight of any similar style body. And they can be customized into a variety of configurations, including sampling or diverting flow.

•True Zero Static design
•Fully machined from block
• Ergonomic design
• Completely drainable
•Readily cleanable exterior, all surfaces sloped and radiused
•Integrated sampling valves and other custom options available

• EPDM
• Fluoropolymer faced (TFM 1700)/EPDM
• Silicone
• Viton
• Ultraz Fluoroelastomer
• All diaphragms conform to USP Class VI specifications
• Ultraz diaphragms conform to USP Class VI, ASMEBPE and meet the extractable requirements of CFR 21 177.2600

•	Available Sizes	:	1/4", 3/8", 1/2", 3/4", 1", 1½", 2", 2½",3", 4",6"
•	Body Material	:	316L ASME BPE, Hastelloy,AL6XN
•	Diaphragm Material	:	EPDM, PTFE, Silicone, Ultraz®, Viton® Cert. FDA- USP Class VI
•	Operation	:	Standard Manual Bonnet,O-Ring Sealed Manual Bonnet,Pneumatic ,Submersible Bonnet Assembly
•	Surface Finish	:	SFV4,SFV5, SFV6, SFV1 ,SFV2 According to ASME BPE

Low volatile grade, platinum-cured silicone hose for critical pharmaceutical, biomedical, cosmetic, and food applications comprises the liner of APSW. The liner is then slipped onto a mandrel and wrapped with polyester mesh fabric, 316 stainless steel reinforcing wire, and additional silicone. It is cured into a homogeneous hose to enhance its pressure and vacuum capabilities. APSW has undergone extensive physical, chemical, and biological testing . APSW is not intended for implantation and is not to be used for continuous steam applications.

•Rated for full vacuum
•Crush and kink resistant
•Durable and heavy-duty yet translucent for visual flow contact
•Sterilizable by autoclave, CIP, SIP, and gamma radiation processes
•Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure

•	Available Sizes	:	1/4" -5/16" -3/8" -1/2" -5/8" 3/4" -1"
•	Tube	:	P.T.F.E ( Polyetetrafluroethylene)
•	Temperature	:	-75°C to 230°C
•	Reinforcement	:	stainless steel braid &stainless steel wire coated by a white silicone.
•	Certifications	:	FDA 21CFR - 177 2600, USP ,Hemolysis, Cytotoxicity